811 W 14th St, San Angelo, TX 76903, USA Contact Us info@city-lumber.com (325) 653-1403

Apollo 1 in. Expansion PEX in. X 3/4 in. D Poly Alloy Tee

Item Code: 4020403

Apollo expansion PEX Poly Alloy fittings are exclusively designed for use with PEX-A pipe. The fittings offer larger than traditional crimp fittings for full flow resulting in fast delivery of potable water. For use with PEX-A pipe only. Suitable for use in hot and cold domestic potable water and hydronic heating and cooling piping systems. Compatible with uponor (wirsbo) ProPEX piping systems. ProPEX is a trademark of Uponor. All Apollo Expansion PEX Poly Alloy Fittings have barb ends unless otherwise noted. Apollo Expansion PEX Poly Alloy Fittings can be used with Apollo Expansion PEX (PEX-A) or uponor ProPEX tubing. Fittings may be installed in concrete, gypsum-based lightweight concrete, sand, asphalt, in or under wood flooring, or behind wallboard or plaster. Use Apollo expansion PEX poly alloy fittings with apollo expansion PEX pipe and fasten to pipe using apollo expansion sleeves with apollo expansion PEX tools. Follow all instructions included with apollo tools, fittings, and fasteners. To cut PEX tubing, use a PEX tubing cutter and cut at a 90-degree angle. Clear the cut end of any burrs or debris. Place the expansion sleeve on the end of the tubing. Insert tool head into tubing end and expand. Immediately remove the tool and insert the fitting into the pipe to the shoulder. The pipe may take up to two minutes to fully seal fitting.

Category PVC & Plastic

Description

Apollo expansion PEX Poly Alloy fittings are exclusively designed for use with PEX-A pipe. The fittings offer larger than traditional crimp fittings for full flow resulting in fast delivery of potable water. For use with PEX-A pipe only. Suitable for use in hot and cold domestic potable water and hydronic heating and cooling piping systems. Compatible with uponor (wirsbo) ProPEX piping systems. ProPEX is a trademark of Uponor. All Apollo Expansion PEX Poly Alloy Fittings have barb ends unless otherwise noted. Apollo Expansion PEX Poly Alloy Fittings can be used with Apollo Expansion PEX (PEX-A) or uponor ProPEX tubing. Fittings may be installed in concrete, gypsum-based lightweight concrete, sand, asphalt, in or under wood flooring, or behind wallboard or plaster. Use Apollo expansion PEX poly alloy fittings with apollo expansion PEX pipe and fasten to pipe using apollo expansion sleeves with apollo expansion PEX tools. Follow all instructions included with apollo tools, fittings, and fasteners. To cut PEX tubing, use a PEX tubing cutter and cut at a 90-degree angle. Clear the cut end of any burrs or debris. Place the expansion sleeve on the end of the tubing. Insert tool head into tubing end and expand. Immediately remove the tool and insert the fitting into the pipe to the shoulder. The pipe may take up to two minutes to fully seal fitting.

Specifications

ANSI Certified

Yes

Brand

Apollo

Brand Name

Apollo

Category

PVC & Plastic

Country of Origin

Canada

Material

Poly Alloy

Maximum Pressure

200

Maximum Temperature

200

Product Type

Tee

Description

Apollo expansion PEX Poly Alloy fittings are exclusively designed for use with PEX-A pipe. The fittings offer larger than traditional crimp fittings for full flow resulting in fast delivery of potable water. For use with PEX-A pipe only. Suitable for use in hot and cold domestic potable water and hydronic heating and cooling piping systems. Compatible with uponor (wirsbo) ProPEX piping systems. ProPEX is a trademark of Uponor. All Apollo Expansion PEX Poly Alloy Fittings have barb ends unless otherwise noted. Apollo Expansion PEX Poly Alloy Fittings can be used with Apollo Expansion PEX (PEX-A) or uponor ProPEX tubing. Fittings may be installed in concrete, gypsum-based lightweight concrete, sand, asphalt, in or under wood flooring, or behind wallboard or plaster. Use Apollo expansion PEX poly alloy fittings with apollo expansion PEX pipe and fasten to pipe using apollo expansion sleeves with apollo expansion PEX tools. Follow all instructions included with apollo tools, fittings, and fasteners. To cut PEX tubing, use a PEX tubing cutter and cut at a 90-degree angle. Clear the cut end of any burrs or debris. Place the expansion sleeve on the end of the tubing. Insert tool head into tubing end and expand. Immediately remove the tool and insert the fitting into the pipe to the shoulder. The pipe may take up to two minutes to fully seal fitting.

Specifications

ANSI Certified

Yes

Brand

Apollo

Brand Name

Apollo

Category

PVC & Plastic

Country of Origin

Canada

Material

Poly Alloy

Maximum Pressure

200

Maximum Temperature

200

Product Type

Tee

SEARCH ×

Items ()

Item	Description	Item Code	Qty
	Product Name {{product.name}}	Item Code {{product.sku}}

Clear All

Details

{{product.brand_name}}

{{product.item_name}}

Item Code: {{product.item_sku}} Original SKU: {{product.original_sku}}

Customer Product Code : {{product.customer_product_code}}

Category {{product.category_name}}

Maximum order quantity {{ product.item_maximum_order }}

Call for price

- +

Starting from

/ {{product.item_pack_uom}}

{{product.item_pack_include}}

{{ product.display_uom_price }} / {{ product.display_uom }}

- +

{{ product.inventory_v2.shipping.text }} {{ product.inventory_v2.shipping.text }}

Buy {{qtyprice.quantity}} or more for each

{{attribute.name}}

{{attribute.value}}

{{attribute.name}}

{{attribute.value}}

${{product.item_name}}$

{{{product.item_description}}}

{{selling_point}}

	Location	Stock
	{{location.warehouse}}	{{location.quantity}}

Want To Swap ?

{{reason}}

${{product.item_name}}$

{{product.item_name}}

Item Code: {{product.item_sku}}

Maximum order quantity {{ product.item_maximum_order }}

{{product.item_pack_uom}}

Call for price

- +

{{reason}}

${{selectproduct.item_name}}$

{{selectproduct.item_name}}

Item Code: {{ selectproduct.item_sku }}

Maximum order quantity {{ selectproduct.item_maximum_order }}

{{selectproduct.item_pack_uom}}

Call for price

- +